Share this Story

Canon printers render top-class printing services and can be used for office and home purses. Because of its user-friendly interface, users prefer to use this device. However, you might confront several issues while working with the Canon device. Recently, it is reported that lots of Canon printer users get stuck with an error notification which comes up on the display screen “Canon printer error 5200”. This error code prevents them from printing any file or document.

Such a situation arises if either the device upgrades automatically, or the OS. This affects the connected software and can also arise because of internal bugs and glitches.

Potential Reasons Behind Canon MX340 Printer Error 5200

There can be several factors which are responsible for the Canon printer error. Thus, without recognizing the causative factors, resolving the error can be quite hard.

Thus, check out the underlying section and make a try to recognize Canon printer error.

  • Low ink level in the toner or ink cartridge.
  • Problematic or defective ink cartridge.
  • Certain technical complications inside the printer printhead.

4 Solutions to Troubleshoot Canon Printer Error Code 5200

Here are the solutions which you need to follow in order to resolve this issue.

Solution 1: Restart Printer

As a primary hack, you are required to restart your printing device and check if it helps to fix the error or not. Follow these instructions provided below:

  • Initially turn off the printing device by pressing the “Power” button.
  • Once the device is off, eject the power cable from the device.
  • Leave the printing device for a minimum of 15 minutes.
  • Then, connect one end of the power cord to the back of the device and another end to the power source.
  • After that, turn on the device by pushing the ”Power” button.

Once your Canon device boots up, you can Check whether the Canon printer error 5200 has been resolved from the device or not.

Solution 2: Check the Device

Even after performing the initial hack, if the Canon printer error still persists then follow the instructions underneath:

  • First turn off the device and open the front cover of the printer. Then, make a try to locate the cartridge access door.
  • After you find it, attempt to open the cartridge access door. Once you open the cartridge access door, try to take out the entire ink cartridges cautiously.
  • Then, place them on a flat surface. Leave the device for a minimum 15 minutes and now reinsert the ink cartridges back to their location.
  • After that, connect again the power cable of the printer and turn on the device by pressing the “Power” button.

Once your Canon printing device turns on, try to check whether the Canon printer error 5200 gets eliminated or not. In case, the error still persists, move towards the next hack.

Solution 3: Run the Printer Troubleshooter Tool

Run the Printer Troubleshooter tool to fix the matter. Printer Troubleshooter is a built-in utility which comes with all versions of the Windows OS.

Thus, if you are a Windows device user, then you can easily run this utility to fix the corrupted system files and other technical complications.

Just follow the under-mentioned instructions to run the Printer Troubleshooter tool:

  • Continue to click on the “Start” icon to open the “Start” menu. After that, head over to the “Settings” menu and open the window and locate and choose the “Devices”.
  • Start the “Printers and Scanners” section and try to find your Canon printer from the available menu list.
  • When you find your printer, proceed to right click on your Printer and click the “Manage” button.
  • Moreover, choose the “Run the Troubleshooter” button and stick to the instructions which appear on the display screen.

Solution 4: Reset the Printer

You can also attempt resetting the printing device. According to tech-experts, resetting the printing device will remove the error. Here are the steps which one should follow:

  • Initially, turn on the printing device and proceed to click on the “Menu” icon to open the window. After that, access the directional arrow keys in order to make essential changes in the setup menu.
  • Head over to the “Device Settings” and click the “OK” button from the menu. After accessing the “Settings” menu, select the option titled “Reset” and follow the on-screen instructions to finish the reset procedure.

Hopefully, after resetting the Canon printer device, you will be able to fix the Canon printer error code 5200 without much hassle. In case of trouble consult experts.

Contact Canon Experts available at Uspcsolutions for Guidance:

In case after going through above steps you would have resolved the error code of your own. By chance if you are unable to fix it or the error code still persists, then don’t lose hope at all. Consult Canon tech-savvy geeks available at Uspcsolutions to get rid of this annoying error code of your own.

FAQs

Q) Why is my Canon Printer Blinking Orange?

  1. When a Canon printer shows orange indicator flashing, this usually defines that there are certain internal complications with the toner, ink cartridges. Or, just faulty configuration settings can lead to Canon printer error code.

Q) Why are You receiving a Canon Printer Error?

  1. One of the most possible reasons for the Canon printer error is the connection between the printing device and the computer. Initially, try to decide whether the transmission USB cable is working suitably or not.

If there is no internal glitch within the transmission cable, then the trouble might be related to the printer driver. Outdated or corrupted printer drivers often create several errors.

Q) What is the Default Error Code on Canon Printer?

  1. The Default error is generally triggered when users are unable to set up their new printing device suitably or any other printer as the default device on your device. Moreover, this issue can also be caused by certain issues within the Windows registry.

Leave a Reply

Your email address will not be published. Required fields are marked *